Thursday, January 31, 2013

A Primrose by Any Other Nutrition

In a recent frenzy of cleaning, friend of the program Devon Griggs rediscovered a stash of some terrifying green liquid.  Not wanting to consume the stuff himself, Devon offered a phial to me.


By its packaging, it was probably once meant for human consumption.  Now, however, with an abundance of suspended particles and an expiration date months past, there is no telling what it could do.  Considering my experience with green foods lately I politely declined, and Devon concluded he would throw it out.  The shock of this even struck me: Devon was wasting food.  I don't know if it was my state as a broke college student or my mother speaking through my eighteen years under her roof, but I could not allow this.

This put us in an awkward contention, a state science was able to alleviate.  I wondered what the effects of this sludge could have on a human body, when a simple test came to me: feed the liquid to a subject and observe any mutations.  We here at DiaBolitech are going to try to poison a plant.


The reasoning follows thusly: the cheapest life form that would passively accept the substance (henceforth referred to as chemical G) that I could find on short notice was a primrose - $1.50 apiece at Fred Meyer.  Friend of the program (and temporary laboratory technician) Kathryn Fuller agreed to coordinate the deed, thereby absolving myself of responsibility and freeing my time for other things (like writing late blog posts).


One plant (Subject HG371002) is fed water.  Another (Subject JP579086) is fed an equal amount of chemical G.
Though it may not be apparent from the pictures, the second is somewhat wilted.
Naturally, the subject record numbers were randomized (to avoid any primroses bias).







Fig. 1 - Subject HG371002                                                                                                 Fig. 2 - Subject JP579086




Just for kicks, a third specimen (Subject UW235926) was kept under a sun lamp in lieu of actual sunshine.  In the week this experiment has run so far, the subject appears to have developed a taste for pistachios.  Sunlight is essential to photosynthesis (the process by which plants make glucose), so perhaps the subject tried to augment its diet?  Is this plant cannibalism?

Sadly, we haven't broken new ground on this point: life recycles material all the time, and plants growing out of other plant material is nothing new.  Even carnivorous plants are well documented (some even reside in my wonderful Florence).  HOWEVER, plants that can move around to facilitate this are rare.  Further, the subject is potted - how could it have detected nuts, brought them to its plate, consumed them and then deposited the shells neatly on one side?
Truly, this is science worth doing.





                                                                                                                               Fig 3: Dietary Supplement?


My thanks, and the thanks of DiaBolitech, go out to this brave young lab tech.

Fig. 4: A scientist at work.  Because science...sometimes requires dancing?

She's a loose cannon, but man does she get results.

Sunday, January 27, 2013

The Philosophy of Fatigue: A Response

My dear fans:

I must apologize for the tardiness of this post.  There are many reasons - the merciless nature of this newly dawning semester, my sinusoidal affliction, the amount of blood I lost in battling a kiwi this afternoon - but the end result is I am behind.  The next post is in the works (one that really almost looks like science) but serendipitously, I have a reserve.

A recent article on why sleep is terrifying prompted a series of discussions between myself and friend of the program Isabel.  While the minutes of those conferences are company records (and therefore classified), DiaBolitech's resident philosophy consultant suggested an eclectic memorandum could be released to the public.  These are her notes.






"The human mind is a piece-wise function."Ok.Here's a piecewise function:Notice that although this function is not continuous, there is always a value for f(x).

 

What if there was a piecewise function with holes in it?  Would the mind cease to exist?  What if the hole didn't even have a limit?Right now, however, we are assuming that the existence of the human mind can be described by a piecewise function.  If we were to say that the human mind behaves like a piecewise function, that would make more sense.  Alas, we're dealing with existence.Got it!When we are awake, we are aware of our own existence.  Even when you dream, sometimes you are the observer and are aware of yourself.  But sometimes, you completely black out.  Or, during meditation, people work to get rid of the "self".  Or, when acting, the "self" quietly slips away and the character comes into the forefront.  So, the "self" ceases to exist.What brings it back?Well, two things have not changed: time and the physical.  Time moves forward, so we jump over the break or hole and continue on with real values of f(x).  Furthermore, the body never ceased to exist, so maybe it acts like an anchor to reality.Could we go even further and say that the body is comparable to the x-y axis, providing an anchor or framework for the mind/function?  Without the axes, the function wouldn't exist.  Discuss.I suppose you can conclude, form all this, that you don't have to worry about not existing while you sleep.   As long as time keeps moving in the same direction and your body continues to exist, your mind can wink in and out of reality and you'll be just fine.  However, if time stops or your body ceases to exist while you sleep, you may be in trouble (oh! Story idea!).  But you won't exist to know you don't exist, so...it's all good?!




I don't know, Isabel.  I fought a citrus fruit today.  I just don't know what's right anymore.

Friday, January 18, 2013

Video Update: Stagewrighting, part 2

Sweet Honey Biscuits!  This is the first video update.  


Clearly, I have a lot to learn about video blogging.  Also, this was shot over the course of a week, so parts of it may not make sense.  There were some problems with the uploading process, so we had to get a youtube channel.  Rest assured, though, all future videos will (probably) be posted here regardless.





Credit where it's due:

Video editing by Marissa Birminghamham

Thursday, January 17, 2013

The Star Problem

In the post about the Votum Nauta, I mentioned the application of an integration technique I had learned the previous semester.  This thought goes along the same lines, but its origin goes back further than 2012.

Growing up, I was in an excellent position to see the stars.  Being a mild insomniac I spent hours on the roof staring at them, and being myself I often looked for right triangles.  It isn't easy to set a protractor to the heavens, so I failed to find one, but once again math can give me an answer.

Firstly, let us consider how many triangles can appear in the sky.  On a clear urban night, there are about 250 stars visible.  In the country, there are about 2500 (certainly a more appropriate estimate).  Every mathematician loves fomulae, and in this case finding one to describe the number of triangles drawn from an arbitrary number of points would be ideal.  Friend of the program Devon Griggs and I worked on this problem for a few hours.  He came up with a sum, but I prefer my own answer:
The math behind this is fairly simple: with the total number of points (n), we can take a combination (the number of points where the order does matter)
 and changing it so that the order does not matter, we get
Plugging in 2500 points, we find there are 2.6 billion possible triangles.  Which is a lot.  Problematically, this equation requires no set of three points be colinear (or appear to be colinear), which certainly is not the case with our current set.  We need to define a right triangle in this context, which means another questionable estimate.  Let's suppose a person can distinguish angles by about one degree.  When we choose the third point for the triangle, we create an angle that may or may not be ninety degrees: there are two windows where this can occur (the left and the right) out of 360 possible degrees.  However, for the T(n) formula above to work, we need to eliminate two more windows - the colinear ones.  This means we need to separate the non-colinear arrangements and then the right-angled ones:
This cuts the number down to about 14 million.  There are other considerations one could make: to an observer on earth, the sky may seem like a large black dome, which would mean these triangles would have to be found in non-euclidean space.  On that note, the triangles found are drawn from an earthling perspective, which means there is a slim chance that the stars actually form a right triangle in space (the only way this could work is if at least two of them were equidistant from earth).  Either scenario requires its own set of hair-brained estimations.  Assuming my younger self could be satisfied with this appearance of a right triangle, we will accept this answer.


This equation means I did see a right triangle - probably several thousands of them, in fact - but it does not actually help me find one.  Regardless, this problem and its solution illustrates the beauty of mathematics: that questions with a simple phrasing but a difficult approach, ones we consider even in childhood, can be addressed and explored with math.  Though this problem is fairly trivial, it represents something very important: the process of asking questions like this (and seeking their answers) is one of the most valuable things about human intellect - that we can assign meaning to natural phenomena, and come to rational conclusions.  This is why I study the sciences.  I care less about making money than finding and assessing interesting questions, questions that inspire me.  To me, that is what math is all about.




Also counting cards.  Math is good for that.  I'm not saying there exists a perfect system, but the guy in our family who wins most often is a math professor.

Wednesday, January 9, 2013

The Votum Nauta

Heretofore, this Blog has been a little heavy on the science and a little light on the shenanigans.  Well, grab your grog and accordion, because a blog post to which there has been much allusion is finally here: it is time for the best (and only) tale from my sea-faring days.

You didn't think this hat was for show, did you?

Fans, it is no secret that I love adventure.  Sometimes adventure finds me.  Often enough, though, one is required to build adventure from the ground up.  In the summer of my twentieth year (being nineteen years of age, young, and crazy) my schemes skewed to sailing.  Being an engineer, my schemes revolved around making my own vessel.

Of course, this would not be a good post without tales of my hilarious near-failure subsequent catastrophe.  It turns out that building a ship is hard.  Really hard.  Below is a rough sketch of my design.


For some reason I deemed it necessary to make the sides of the ship three feet high.  To handle the pitching and rolling of the open sea, perhaps?  That's about as good an explanation as any.  Whatever the reason, the result was a ship with an impractically high center of gravity.  Its first time in the water, the ship nearly capsized.

In retrospect, this experience should have been a pretty clear omen.

A few days, much pacing, and one relatively simple integral later (thank you, Professor Callender) I had a solution.  By weighing down the boat with a sizable chunk of ballast, I could get its center of gravity to be below the waterline, thereby (hopefully) stabilizing this conglomeration of plywood enough to work on other issues like the sails, mast, and multiple hull leakages.  My calculations called for nearly four hundred pounds of ballast.

This one math problem was the only scientific part of the process.  The hull was shaped by doodling on a piece of paper, saying to myself "hey, that looks cool!," and drawing it up in the Solidworks software program.  The mast was a hapless alder tree I had hewn (with an axe, because sometimes the old ways are best) and trimmed (with a chainsaw, because I didn't have all day).  The hull was sealed with liberal applications of deck caulking, a substance known in the State of California to cause birth defects and known in the State of Oregon to fail horrendously at providing a waterproof seal on things that should definitely have a waterproof seal.  The sails were constructed in the same manner as the hull (which I will hereby patent as the "Hey, That Looks Cool!" method).

So perhaps building a ship isn't hard as long as you take time to do things right - which I clearly did not.

One spectator described it (and fittingly so) as a "wooden bathtub."  When empty and dry I could barely lift the thing; when seated I couldn't reach the sails; when standing I ran the serious risk of capsizing.  THIS PLYWOOD BEAST took on water constantly, could barely catch wind, and was awkward and unbecoming to manage.  I loved her dearly.

After one trial run on a placid day at a charitable lake, I deemed her seaworthy. Or, as close to the sea I was willing to get.  In this instance, "sea" was the Siuslaw River, a few miles from the open ocean.  I found a spot (at high tide on the mud flats) to weigh anchor.  The water at this point was still and came close to the highway.  Even at high tide, though, the keel scraped bottom.  It was several yards of ungainly paddling until I reached passable water.

At this point, though, I encountered another difficulty: the sails had been shaped and rigged by a lunatic.  They were designed to look like sails, not to be sails.  With the right wind I probably could have found some means of propulsion, but there was none.  Only the river's current (gentle as it was) supplied any force.  The issue here is that steering with a rudder assumes the boat is somehow propelled.  Bobbing up and down with the waves, a rudder does little good to actually change the direction of the boat.  So for about two miles I drifted, hauling as best I could with my tiny makeshift paddle, until at last I saw the waterfront of my beloved Florence passing me on the right.
Here I faced the most serious problem: the current swept me to the south bank, but town (and my egress) were on the north.  With about a quarter mile of passable river to go (and the ocean to greet me should I overshoot), my paddling began to increase in speed and intensity.

Florence, Oregon is known for its iconic bridge.  What is not seen from shore, however, is that the bridge funnels the river into a surprisingly choppy and unrelenting force of water.  On some level it was a dear wish of mine to sail gloriously under this bridge and laugh like the mad captain I fancied myself.  When I fantasized the moment in my head I imagined many things, chief among them the soundtrack from Pirates of the Caribbean.  I did not imagine the water pooling above the already-soaked sandbags in the bottom of my ship, nor being hamstrung by the lack of wind.  The funneling effect caught me quite unaware, as did being tossed helplessly beneath the bridge.  Backward.


The conclusion of this tale is rather uninspiring.  I pulled ashore, wet, sandy, and proud.  My mother met me there, trying to maintain her usual calm demeanor over obvious distress.  Somehow I got the thing back into the truck bed from whence it came, and in time it returned to the backyard from where it was built.  Its hull now rotted in that backyard until last week, when I found myself splitting the familiar hull back into its constituent boards.

"But Blair," exclaims the reader, "how can you so brashly cast aside this symbol of your youth and brevity?  How can you allow her to rot and burn?  Is there so little respect for your boat?  Was this only another project?"
First of all, hypothetical reader, you are entirely too dramatic.  Yes, it was hard to tear her apart, but the time had come.  More importantly, it is the hull that is being burned.  The ship lives on my wall in the nameplate.

If you are a reader of titles (specifically the title of this post) you already know her name: The Votum Nauta.  I always thought the use of Latin in everyday life rang of a pretentious nature, but somehow I couldn't resist it here (thank you, Google translate).  Yes, it seems incongruous to use so noble a name for such a leaky plywood tub, but I feel it made sense.  "Votum Nauta" translates roughly to "Hope Sailor," as in "One who Sails on Hope" or "This Boat is held together with hope and prayers."

Though I jest, there is something very important in this.  The Votum Nauta was a flawed project, yes, but it was a project directed by my will.  Its design was mine, the sweat and challenges in its creation were mine, its fruition and fateful (though happily uneventful) journey were mine, and its heart - the heart that says we can by the strength of our hands and the courage of our hearts build something and bear it against nature - that will always be mine, even if the hull burns and the nameplate fades.
Because our adventure, dear readers, is exactly what we make it to be.


Happy sailing.







Credit where it's due:

Pictures taken by Rachel Pearson

Wednesday, January 2, 2013

Of Bagels and their Geometry

If it is not evident by the post bashing on the writing ability of my 14-year-old self, I have been thinking more and more about my high school days.  Fans, let me introduce you to the six-year-old problem:
Suppose there is a doughnut shop that makes the most amazing frosting ever.  They make two products: doughnut holes (in the shape of a sphere) and doughnuts (in the shape of a torus). They charge by the pound and you have limited funds.  To maximize the amount of this magical frosting you can get, is it better to buy doughnuts or doughnut holes?
This problem was posed to me in a geometry class in eighth grade.  I never attempted it because I didn't want to waste two hours trying to derive the surface area if it was beyond my ability.  I always wondered, though, how to find the surface area, and if I could have done so at the time.
I found the answer to the first question last semester in vector calculus: if involves a parameterized surface, which means a double integral, a weird looking square root, a lot of trigonometric identities, and something called a jacobian.  The calculation looks horrid at first, but it simplifies rather nicely (post in the comments if you are interested).
The answer to the second question is decidedly "No, there is no way I could have figured out the surface area of a torus."

There is one more question to answer:  what did my crazy (substitute) geometry teacher expect me to say?  Quite simply, a sphere is the minimal surface structure, which means it has the least amount of surface area per volume of any shape.
It is therefore optimal to buy doughnuts.


These are the problems that keep me awake at night in the best possible manner: questions like this are why I love math, and in part why I want to be an engineer.  We'll talk more abstractly about these types of questions in a future post, but the story of tori and its delicious manifestations doesn't end here.


I always knew engineers thought alike, but in a recent trip to Eugene I found proof.  I passed a store with an especially interesting sign.


Bagels are not spheres.  They are tori.

I could spin the story in humorous fashion, but we'll keep it short.  It turns out this place was made by an electrical engineer who, presumably, intentionally gave the cafe a geometrically misleading name (implying EE's are smarter than I had given them credit for).




Good bagels, too.  I recommend the place.  In the words of Bilbo, it is "...almost as old as I am!"